Dell Force10 Z9000 - Show Ip Bgp Regexp

Add-path support enabled
Peer-group members (* - outbound optimized):
1.1.1.5
1.1.1.6
10.10.10.2*
20.20.20.100
Example
FTOS#show ip bgp peer-group
Peer-group RT-PEERS
Description: ***peering-with-RT***
BGP version 4
Minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
BGP neighbor is RT-PEERS
Number of peers in this group 20
Peer-group members (* - outbound optimized):
12.1.1.2*
12.1.1.3*
12.1.1.4*
12.1.1.5*
12.1.1.6*
12.2.1.2*
12.2.1.3*
12.2.1.4*
12.2.1.5*
12.2.1.6*
12.3.1.2*
12.3.1.3*
12.3.1.4*
12.3.1.5*
12.3.1.6*
12.4.1.2*
12.4.1.3*
12.4.1.4*
12.4.1.5*
12.4.1.6*
Related
Commands
neighbor peer-group (assigning peers) – assigns a peer to a peer-group.
neighbor peer-group (creating group) – creates a peer group.
show ip bgp peer-group (multicast) – views information on the BGP peers in a peer group.
show ip bgp regexp
Display the subset of the BGP routing table matching the regular expressions specified.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show ip bgp regexp regular-expression [character]
Parameters
regular-
expression
[ character ]
Enter a regular expression then use one or a combination of the
following characters to match:
• . = (period) any single character (including a white space).
• * = (asterisk) the sequences in a pattern (0 or more
sequences).
412