Dell Force10 Z9000 - Show Boot System

Parameters
url Enter the following keywords and a filename:
• For a file on the internal Flash, enter flash:// followed by
the filename.
• For a file on the external Flash, enter slot0:// followed by
the filename.
Command Modes EXEC Privilege
Command History
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series Original command
show boot system
Displays information about boot images currently configured on the system.
C-Series, E-Series, Z-Series, S4810
Syntax
show boot system {all | linecard [slot | all] | rpm}
Parameters
all Enter the keyword all to display boot image information for all
linecards and RPMs.
linecard Enter the keyword linecard to display boot image information for
the specified line card(s) on the system.
rpm Enter the keyword rpm to display boot image information for all RPMs
on the system.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1
Introduced on the
Z9000
Version 8.3.11.1 Introduced on the Z9000
Version 7.7.1.0 Introduced on the C-Series and E-Series.
Example
FTOS#show boot system all
Current system image information in the system:
=============================================
Type Boot Type A B
74