Dell Force10 Z9000 - Ip Proxy-Arp; Ip Redirects

You can separately configure both IPv4 and IPv6 domain name servers.
Related
Commands
ipv6 name-server – configures an IPv6 name server.
ip proxy-arp
Enable proxy ARP on an interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
ip proxy-arp
To disable proxy ARP, use the no ip proxy-arp command.
Defaults Enabled.
Command Modes INTERFACE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Related
Commands
show ip interface – displays the interface routing status and configuration.
ip redirects
Enable the interface to send ICMP redirect messages.
E-Series
Syntax
ip redirects
To return to default, use the no ip redirects command.
Defaults Disabled.
Command Modes INTERFACE
Command History
Version 8.1.1.0 Introduced on the E-Series ExaScale.
793