Dell Force10 Z9000 - Advertise Med Softphone-Voice; Advertise Med Streaming-Video

advertise med softphone-voice
Configure the system to advertise softphone to enable IP telephony on a computer so that the computer can be used as
a phone.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
advertise med softphone-voice {vlan-id layer2_priority
DSCP_value} | {priority-tagged number}
To return to the default, use the no advertise med softphone-voice {vlan-id
layer2_priority DSCP_value} | {priority-tagged number} command.
Parameters
vlan-id Enter the VLAN ID. The range is 1 to 4094.
layer2_priority Enter the Layer 2 priority (C-Series and E-Series only). The range is 0
to 7.
DSCP_value Enter the DSCP value (C-Series and E-Series only). The range is 0 to
63.
priority-tagged
number
Enter the keywords priority-tagged followed the Layer 2
priority. The range is 0 to 7.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series and E-Series.
Related
Commands
debug lldp interface – debugs LLDP.
show lldp neighbors – displays the LLDP neighbors.
show running-config lldp – displays the LLDP running configuration.
advertise med streaming-video
Configure the system to advertise streaming video services for broadcast or multicast-based video. This does not
include video applications that rely on TCP buffering.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
advertise med streaming-video {vlan-id layer2_priority
DSCP_value} | {priority-tagged number}
971