Dell Force10 Z9000 - Show Fips Status

show fips status
Displays the status of the FIPS mode.
Z-Series, S4810
Syntax
show fips status
Defaults None
Command Modes EXEC
Example
FTOS #show fips status
FIPS Mode: Enabled
FTOS#
Command History
Version 9.1(0.0) Introduced on the Z9000.
Version 8.3.12.0 Introduced on the S4810.
Related
Commands
show ip ssh Display information about established SSH sessions.
show system (S-
Series and S4810)
Display the current status of all units in the system.
show ip ssh
Configure the port for bridge-to-FCF links.
Z-Series, S4810
Syntax
show ip ssh
Defaults None
Command Modes EXEC
EXEC Privilege
Example
FTOS #show ip ssh
SSH server : enabled.
SSH server version : v1 and v2.
Password Authentication : enabled.
Hostbased Authentication : disabled.
RSA Authentication : disabled.
Vty Encryption HMAC Remote IP
1 3des-cbc hmac-md5 10.1.20.48
2 3des-cbc hmac-md5 10.1.20.48
With FIPS Mode enabled:
FTOS #show ip ssh
SSH server : enabled.
620