Dell Force10 Z9000 - Debug Ip Bgp Dampening

notifications Enter the keyword notifications to view BGP notifications.
soft-
reconfiguration
Enter the keywords soft-reconfiguration to view only
information on inbound BGP soft reconfiguration.
updates Enter the keyword updates to view BGP updates.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
To view information on both incoming and outgoing routes, do not include the in and out
parameters in the debugging command. The in and out parameters cancel each other; for
example, if you enter the debug ip bgp in command and then enter the debug ip
bgp out
command, you will not see information on the incoming routes.
Entering a no debug ip bgp command removes all configured debug commands for BGP.
Related
Commands
debug ip bgp events – views information about BGP events.
debug ip bgp keepalives – views information about BGP keepalives.
debug ip bgp notifications – views information about BGP notifications.
debug ip bgp updates – views information about BGP updates.
show debugging – views enabled debugging operations.
debug ip bgp dampening
View information on routes being dampened.
C-Series, E-Series TeraScale, Z-Series, S-Series
Syntax
debug ip bgp ipv4 multicast dampening
To disable debugging, use the no debug ip bgp ipv4 multicast dampening
command.
Parameters
dampening Enter the keyword dampening to clear route flap dampening
information.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP support for the E-Series.
352