Dell Force10 Z9000 - Ip Dhcp Snooping Database; Ip Dhcp Snooping Database Renew

• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
slot/port Enter the slot and port number of the interface.
lease time Enter the keyword lease followed by the amount of time the IP
address is leased. The range is 1 to 4294967295.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the C-Series and S-Series.
Related
Commands
show ip dhcp snooping – displays the contents of the DHCP binding table.
ip dhcp snooping database
Delay writing the binding table for a specified time.
C-Series, S-Series, Z-Series, S4810
Syntax
ip dhcp snooping database write-delay minutes
Parameters
minutes The range is 5 to 21600.
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the C-Series and S-Series.
ip dhcp snooping database renew
Renew the binding table.
C-Series, S-Series, Z-Series, S4810
Syntax
ip dhcp snooping database renew
1340