Dell Force10 Z9000 - Audible Cut-Off; Banner Exec

Usage
Information
You must save the configuration and reload the system to implement ASF. When you enter the
command, the system sends a message stating that the new mode is enabled when the system
reloads.
audible cut-off
Turn off an audible alarm.
E-Series
Syntax
audible cut-off
Defaults Not configured
Command Modes EXEC Privilege
banner exec
Configure a message that is displayed when your enter EXEC mode.
C-Series, E-Series, S-Series, Z-Series
Syntax
banner exec c line c
To delete a banner, use the no banner exec command.
Parameters
c Enter the keywords banner exec, then enter a character
delineator, represented here by the letter c . Press ENTER.
line Enter a text string for your banner message ending the message with
your delineator. In the example below, the delineator is a percent
character (%); the banner message is “testing, testing”.
Defaults No banner is displayed.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original Command
98