Dell Force10 Z9000 - Protocol Gvrp; Show Config; Show Garp Timers

protocol gvrp
Access GVRP protocol — (config-gvrp)#.
C-Series, E-Series, S-Series, Z-Series
Syntax
protocol gvrp
Defaults Disabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Related
Commands
disable – globally disables GVRP.
show config
Display the global GVRP configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show config
Command Modes CONFIGURATION-GVRP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Related
Commands
gvrp enable – enables GVRP on physical interfaces and LAGs.
protocol gvrp – accesses the GVRP protocol.
show garp timers
Display the GARP timer settings for sending GARP messages.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show garp timers
655