Dell Force10 Z9000 - Advertise Management-Tlv

Version 7.4.1.0 Introduced on the E-Series.
advertise management-tlv
Advertise management TLVs (Type, Length, Value).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
advertise management-tlv {management-address | system-
capabilities | system-description | system-name}
To remove advertised management TLVs, use the no advertise management-tlv
{management-address | system-capabilities | system-description
| system-name}
command.
Parameters
management-
address
Enter the keyword management-address to advertise the
management IP address TLVs to the LLDP peer.
system-
capabilities
Enter the keywords system-capabilities to advertise the
system capabilities TLVs to the LLDP peer.
system-
description
Enter the keywords system-description to advertise the
system description TLVs to the LLDP peer.
system-name Enter the keywords system-name to advertise the system name
TLVs to the LLDP peer.
Defaults No default values or behavior
Command Modes CONFIGURATION (conf-lldp)
Command History
Version 9.1.(0.0) Modified to support management-address parameter.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
Usage
Information
The command options management-address,system-capabilities, system-
description
, and system-name can be invoked individually or together, in any
sequence.
957