Dell Force10 Z9000 - Hello-Time; Max-Age

Version 7.5.1.0 Introduced on the C-Series.
Version 6.5.1.0 Introduced.
Related
Commands
max-age – changes the wait time before MSTP refreshes protocol configuration information.
hello-time – changes the time interval between bridge protocol data units (BPDUs).
hello-time
Set the time interval between generation of MSTB bridge protocol data units (BPDUs).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
hello-time seconds
To return to the default value, use the no hello-time command.
Parameters
seconds Enter a number as the time interval between transmission of BPDUs.
The range is 1 to 10. The default is 2 seconds.
Defaults 2 seconds
Command Modes MULTIPLE SPANNING TREE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.5.1.0 Introduced.
Related
Commands
forward-delay – the amount of time the interface waits in the Blocking State and the Learning
State before transitioning to the Forwarding State.
max-age – changes the wait time before MSTP refreshes protocol configuration information.
max-age
Set the time interval for the MSTB to maintain configuration information before refreshing that information.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
max-age seconds
994