Dell Force10 Z9000 - Hostname

encryption-type (OPTIONAL) After the keyword password, enter one of the following
numbers:
• 0 (zero) for an unecrypted (clear text) password
• 7 (seven) for a hidden text password
Defaults Not enabled.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
hostname
Set the host name of the system.
C-Series, E-Series, S-Series, Z-Series
Syntax
hostname name
Parameters
name Enter a text string, up to 32 characters long.
Defaults FTOS
Command Modes CONFIGURATION
Command History
Version 8.3.12.0 Changed the default from Force10 to FTOS.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
The hostname is used in the prompt.
115