Dell Force10 Z9000 - Copy (Streamline Upgrade)

Destination file name [startup-config]? old_running
User name to login remote host? sburgess
Password to login remote host? dilling
In this copy scp: flash: example, specifying SCP in the first position indicates that the
target is to be specified in the ensuing prompts. Entering flash: in the second position
indicates that the target is the internal Flash. The source is on a secure server running SSH, so
you are prompted for the user datagram protocol (UDP) port of the SSH server on the remote
host.
Example
FTOS#copy scp: flash:
Address or name of remote host []: 10.11.199.134
Port number of the server [22]: 99
Source file name []: test.cfg
User name to login remote host: admin
Password to login remote host:
Destination file name [test.cfg]: test1.cfg
Related
Commands
cd – changes the working directory.
copy (Streamline Upgrade)
Copy a system image to a local file and update the boot profile.
C-Series, E-Series
Syntax
copy source-url target-url [boot-image [synchronize-rpm
[external]]]
Parameters
Enter the following location keywords and information:
source-url Enter the source file in url format. The source file is a valid Dell
Force10 release image. Image validation is automatic.
target-url Enter the local target file in url format.
boot-image Enter the keyword boot-image to designate this copy command as
a streamline update.
synchronize-rpm Enter the keyword synchronize-rpm to copy the new image file
to the peer RPM.
external Enter the keyword external to designate the target device on the
peer RPM as external flash (instead of the default internal flash).
Default: Internal Flash.
Defaults none
Command Modes CONFIGURATION
Command History
Version 8.4.1.0 Added IPv6 addressing support for FTP, TFTP, and SCP.
66