Dell Force10 Z9000 - Boot Host; Boot Network

boot host
Set the location of the configuration file from a remote host.
C-Series, E-Series
Syntax
boot host {primary | secondary} remote-url
Parameters
primary Enter the keyword primary to attempt to load the primary host
configuration files.
secondary Enter the keyword secondary to attempt to load the secondary
host configuration files.
remote-url Enter the following location keywords and information:
• For a file on an FTP server, enter ftp: //user:password@hostip/
filepath
• For a file on a TFTP server, enter tftp: //hostip/filepath
Defaults Not configured
Command Modes CONFIGURATION
Command History
Version 7.5.1.0 Introduced on C-Series
E-Series Original command
Usage
Information
To display these changes in the show bootvar command output, save the running
configuration to the startup configuration (using the copy command).
Related
Commands
show bootvar – displays the variable settings for the E-Series boot parameters.
boot network
Set the location of the configuration file in a remote network.
C-Series, E-Series
Syntax
boot network {primary | secondary} remote-url
Parameters
primary Enter the keywords primary to attempt to load the primary network
configuration files.
secondary Enter the keywords secondary to attempt to load the secondary
network configuration files.
remote-url Enter the following location keywords and information:
59