Dell Force10 Z9000 - Show Ipv6 Protocol-Queue-Mapping

Rate(kbps)
---- -------- -------- ------- ----- ------
-----------
TCP (BGP) any/179 179/any _ Q6 CP
100
UDP (DHCP) 67/68 68/67 _ Q6/Q5 CP _
UDP (DHCP-R) 67 67 _ Q6 CP _
TCP (FTP) any 21 _ Q6 CP _
ICMP any any _ Q6 CP _
IGMP any any _ Q7 CP _
TCP (MSDP) any/639 639/any _ Q6 CP _
UDP (NTP) any 123 _ Q6 CP _
OSPF any any _ Q7 CP _
PIM any any _ Q7 CP _
UDP (RIP) any 520 _ Q7 CP _
TCP (SSH) any 22 _ Q6 CP _
TCP (TELNET) any 23 _ Q6 CP _
VRRP any any _ Q7 CP _
FTOS#
show ipv6 protocol-queue-mapping
Display the queue mapping for each configured IPv6 protocol.
Z-Series, S4810
Syntax
show ipv6 protocol-queue-mapping
Defaults Not configured.
Command Modes EXEC Privilege
Command History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
Example
FTOS#show ipv6 protocol-queue-mapping
Protocol Src-Port Dst-Port TcpFlag Queue EgPort
Rate(kbps)
-------- -------- -------- ------- ----- ------ --------
TCP (BGP) any/179 179/any _ Q6 CP _
ICMP any any _ Q6 CP _
VRRP any any _ Q7 CP _
FTOS#
564