Dell Force10 Z9000 - Show Vlan

show vlan
Display the current VLAN configurations on the switch.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show vlan [brief | id vlan-id | name vlan-name]
Parameters
brief (OPTIONAL) Enter the keyword brief to display the following
information:
• VLAN ID
• VLAN name (left blank if none is configured)
• Spanning Tree Group ID
• MAC address aging time
• IP address
id vlan-id (OPTIONAL) Enter the keyword id followed by a number from 1 to
4094. Only information on the VLAN specified is displayed.
name vlan-name (OPTIONAL) Enter the keyword name followed by the name
configured for the VLAN. Only information on the VLAN named is
displayed.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.1.(0.0) Updated to support OpenFlow.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Augmented to display PVLAN data for the C-Series and S-Series and
revised the output to include the Description field to display a user-
entered VLAN description.
Version 7.6.1.0 Introduced on the S-Series and revised the output to display Native
VLAN.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
Usage
Information
The following describes the show vlan command shown in the Example below.
Column Heading
Description
(Column 1 — no
heading)
• asterisk symbol (*) = Default VLAN
943