Dell Force10 Z9000 - Description; Disable

Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced.
Usage
Information
Because the resilient ring protocol can potentially transmit 20 packets per interface, you must
restrict debug information.
description
Enter an identifying description of the ring.
C-Series, E-Series, S-Series, Z-Series
Syntax
description Word
To remove the ring description, use the no description [Word] command.
Parameters
Word Enter a description of the ring. Maximum: 255 characters.
Defaults none
Command Modes CONFIGURATION (conf-frrp)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced.
disable
Disable the Resilient Ring Protocol.
C-Series, E-Series, S-Series, Z-Series
Syntax
disable
To enable the Resilient Ring Protocol, use the no disable command.
Defaults Disabled
Command Modes CONFIGURATION (conf-frrp)
641