Dell Force10 Z9000 - Show Ip Udp-Helper

show ip udp-helper
Display the configured UDP helper(s) on all interfaces.
E-Series, S4810
Syntax
show ip udp-helper
Defaults none
Command Modes EXEC
Command History
Version 8.3.7.0 Introduced on the S4810.
Pre-version
8.3.7.0
Introduced on the E-Series ExaScale.
Example
FTOS#show ip udp-helper
--------------------------------------------------
Port UDP port list
--------------------------------------------------
Gi 10/0 656, 658
Gi 10/1 All
Related
Commands
debug ip udp-helper – enables debug and displays the debug information on a console.
ip udp-broadcast-address – configures a UDP IP address for broadcast.
ip udp-helper udp-port – enables the UDP broadcast feature on an interface either for all UDP
ports or a specified list of UDP ports.
768