Dell Force10 Z9000 - Feature Fip-Snooping; Fip-Snooping Enable

Version 8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
feature fip-snooping
Enable the FIP snooping feature on a switch.
S4810 and MXL Switch
Syntax
feature fip-snooping
To disable the FIP snooping feature, use the no feature fip-snooping command.
Defaults Disabled
Command Modes CONFIGURATION
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
fip-snooping enable
Enable FIP snooping on all VLANs or on a specified VLAN.
S4810 and MXL Switch
Syntax
fip-snooping enable
To disable the FIP snooping feature on all or a specified VLAN, use the no fip-snooping
enable command.
Defaults FIP snooping is disabled on all VLANs.
Command Modes
• CONFIGURATION
• VLAN INTERFACE
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The maximum number of FCFs supported per FIP snooping-enabled VLAN is four. The maximum
number of FIP snooping sessions supported per ENode server is 16.
627