Dell Force10 Z9000 - Mac Learning-Limit Mac-Address-Sticky

Defaults none
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the S-Series.
Version 7.8.1.0 Introduced on the C-Series.
Version 7.5.1.0 Introduced on the E-Series.
Usage
Information
This is supported on physical interfaces, static LAGs, and LACP LAGs.
Related
Commands
show mac learning-limit – displays details of the mac learning-limit.
mac learning-limit mac-address-sticky
Maintain the dynamically-learnt mac addresses as sticky MAC addresses on the selected port.
Z-Series, S4810
Syntax
mac learning-limit mac-address-sticky
To convert the sticky MAC addresses to dynamic MAC addresses, use the no mac
learning-limit
command.
Parameters
mac-address-
sticky
Configures the dynamic MAC addresses as sticky on an interface.
Defaults none
Command Modes INTERFACE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.12.0 Introduced on the S4810.
Usage
Information
If you configure mac-learn-limit and the sticky MAC feature is enabled, dynamically-
learned MAC addresses are converted to sticky for that port. Any new MAC address that is
learned also becomes sticky for that port.
Related
Commands
show mac learning-limit – Displays the details of the mac learning-limit.
924