neighbor advertisement-interval
Set the advertisement interval between BGP neighbors or within a BGP peer group.
E-Series
Syntax
neighbor {ipv6-address | peer-group-name} advertisement-
interval seconds
To return to the default value, use the no neighbor {ipv6-address | peer-
group-name
} advertisement-interval command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group-name
Enter the name of the peer group to set the advertisement interval for
all routers in the peer group.
seconds
Enter a number as the time interval, in seconds, between BGP
advertisements. The range is 0 to 600 seconds. The default is 5
seconds for internal BGP peers and 30 seconds for external BGP
peers.
Defaults
• seconds = 5 seconds (internal peers)
• seconds = 30 seconds (external peers)
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 7.4.1.0 Introduced
neighbor default-originate
Inject the default route to a BGP peer or neighbor.
E-Series
Syntax
neighbor {ipv6-address | peer-group-name} default-originate
[route-map map-name]
To remove a default route, use the no neighbor {ipv6-address | peer-group-
name
} default-originate command.
Parameters
ipv6-address
Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group-name
Enter the name of the peer group to set the advertisement interval for
all routers in the peer group.
520
To Next Page
Loading...
