Dell Force10 Z9000 - Bandwidth-Percentage; Bandwidth-Weight

bandwidth-percentage
Assign a percentage of weight to the class/queue.
E-Series, Z-Series, S4810
Syntax
bandwidth-percentage percentage
To remove the bandwidth percentage, use the no bandwidth-percentage command.
Parameters
percentage Enter the percentage assignment of weight to the class/queue. The
range is 0 to 100% (granularity 1%).
Defaults none
Command Modes CONFIGURATION (conf-qos-policy-out)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 6.2.1.1 Introduced on the E-Series.
Usage
Information
The unit of bandwidth percentage is 1%. A bandwidth percentage of 0 is allowed and disables
the scheduling of that class. If the sum of the bandwidth percentages given to all eight classes
exceeds 100%, the bandwidth percentage automatically scales down to 100%.
Related
Commands
qos-policy-output – creates a QoS output policy.
bandwidth-weight
Assign a priority weight to a queue.
C-Series, S-Series
Syntax
bandwidth-weight weight
To remove the bandwidth weight, use the no bandwidth-weight command.
Parameters
weight Enter the weight assignment to queue. The range is 1 to 1024 (in
increments of powers of 2: 2, 4, 8, 16, 32, 64, 128, 256, 512, or 1024).
Defaults none
Command Modes CONFIGURATION (conf-qos-policy-out)
Command History
Version 7.7.1.0 Introduced on the S-Series.
1192