Dell Force10 Z9000 - Show Interfaces Linecard

Field Description
OK? Indicates if the hardware is functioning properly.
Status States whether the interface is enabled (up) or disabled
(administratively down).
Protocol States whether IP is enabled (up) or disabled (down) on the
interface.
Description Displays the description (if any) manually configured for the
interface.
Example
FTOS>
Interface OK? Status Protocol Description
GigabitEthernet 4/17 NO admin down down ***connected-to-
host***
GigabitEthernet 4/18 NO admin down down ***connected-to-Tom***
GigabitEthernet 4/19 NO admin down down ***connected-to-
marketing***
GigabitEthernet 4/20 NO admin down down ***connected-to-
Bill***
GigabitEthernet 4/21 NO up down ***connected-to-Radius-
Server***
GigabitEthernet 4/22 NO admin down down ***connected-to-Web-
Server***
GigabitEthernet 4/23 NO admin down down ***connected-to-PC-
client***
TenGigabitEthernet 6/0 NO admin down down
GigabitEthernet 8/0 YES up up
GigabitEthernet 8/1 YES up up
GigabitEthernet 8/2 YES up up
GigabitEthernet 8/3 YES up up
GigabitEthernet 8/4 YES up up
GigabitEthernet 8/5 YES up up
GigabitEthernet 8/6 YES up up
GigabitEthernet 8/7 YES up up
GigabitEthernet 8/8 YES up up
GigabitEthernet 8/9 YES up up
GigabitEthernet 8/10 YES up up
GigabitEthernet 8/11 YES up up
FTOS>
Related
Commands
show interfaces – displays information on a specific physical interface or virtual interface.
show interfaces linecard
Display information on all interfaces on a specific line card.
C-Series, E-Series
Syntax
show interfaces linecard slot-number
732