Dell Force10 Z9000 - Show Qos Policy-Map-Output

Version 7.5.1.0 Introduced on the C-Series.
Version 7.4.1.0 E-Series Only: Added Trust IPv6 diffserv.
pre-Version
6.1.1.1
Introduced on the E-Series.
Example
FTOS#show qos policy-map-input
Policy-map-input PolicyMapInput
Aggregate Qos-policy-name AggPolicyIn
Queue# Class-map-name Qos-policy-name
0 ClassMap1 qosPolicyInput
FTOS#
Example
FTOS# show qos policy-map-input
Policy-map-input pmap1
Trust ipv6-diffserv
Queue# Class-map-name Qos-policy-name
0 c0 q0
1 c1 q1
2 c2 q2
3 c3 q3
4 c4 q4
5 c5 -
6 c6 q6
7 c7 q7
FTOS#
show qos policy-map-output
View the output QoS policy map details.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show qos policy-map-output [policy-map-name] [qos-policy-output
qos-policy-name]
Parameters
policy-map-name Enter the policy map name.
qos-policy-output
qos-policy-name
Enter the keyword qos-policy-output followed by the QoS
policy name.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
1221