Dell Force10 Z9000 - Show Mac-Address-Table Aging-Time; Show Mac Accounting Destination

show mac-address-table aging-time
Display the aging times assigned to the MAC addresses on the switch.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
show mac-address-table aging-time [vlan vlan-id]
Parameters
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to
display the MAC address assigned to the VLAN. The range is 1 to
4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Added the vlan option on the E-Series.
Version 7.7.1.0 Introduced on the C-Series and S-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
Example
FTOS#show mac-address-table aging-time
Mac-address-table aging time : 1800
FTOS#
Related
Commands
show mac-address-table – displays the current MAC address configuration.
show mac accounting destination
Display destination counters for Layer 2 traffic (available on physical interfaces only).
E-Series, S4810
Syntax
show mac accounting destination [mac-address vlan vlan-id]
[interface interface [mac-address vlan vlan-id] [vlan vlan-id]]
[vlan vlan-id]
Parameters
mac-address (OPTIONAL) Enter the MAC address in the nn:nn:nn:nn:nn:nn format
to display information on that MAC address.
934