Dell Force10 Z9000 - Debug Ip Bgp Peer-Group Updates; Debug Ip Bgp Dampening

debug ip bgp dampening
View information on routes being dampened.
C-Series, E-Series TeraScale, Z-Series, S-Series
Syntax
debug ip bgp ipv4 multicast dampening
To disable debugging, use the no debug ip bgp ipv4 multicast dampening
command.
Parameters
dampening Enter the keyword dampening to clear route flap dampening
information.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP support for the E-Series.
debug ip bgp peer-group updates
View information about BGP peer-group updates.
C-Series, E-Series TeraScale, S-Series
Syntax
debug ip bgp peer-group peer-group-name updates [in | out]
To disable debugging, use the no debug ip bgp peer-group peer-group-name
updates [in | out] command.
Parameters
peer-group peer-
group-name
Enter the keywords peer-group followed by the name of the peer-
group.
updates Enter the keyword updates to view BGP update information.
in (OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP updates sent to
neighbors.
Command Modes EXEC Privilege
Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP support for the E-Series.
422