Dell Force10 Z9000 - Show Ip Bgp Ipv6 Unicast Inconsistent-As

h dead:4::/100 5ffe:10::3 1 00:04:39 1 i
h dead:4::/100 5ffe:11::3 1 00:04:39 1 i
FTOS#
show ip bgp ipv6 unicast inconsistent-as
Allows you to view the information exchanged by BGP neighbors.
E-Series
Syntax
show ip bgp ipv6 unicast neighbors [ipv6-address prefix-length
[advertised-routes | dampened-routes | detail | flap-statistics
| routes]]
Parameters
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix
length in the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros or enter an IP address in dotted decimal format to reset all
prefixes from that neighbor.
advertised-routes (OPTIONAL) Enter the keywords advertised-routes to view
only the routes the neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specific
internal information for the IPv6 address family.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap
statistics on the neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s
feasible routes.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.5.1.0 Added the detail option; added information to output.
Version 7.4.1.0 Introduced
Usage
Information
Lines Beginning with
Description
BGP neighbor Displays the BGP neighbor address and its AS number. The last
phrase in the line indicates whether the link between the BGP router
and its neighbor is an external or internal one. If they are located in
the same AS, then the link is internal; otherwise the link is external.
533