Dell Force10 Z9000 - Service-Policy Rate-Limit-Protocols

Usage
Information
You must create a policy-map by associating a queue number with the qos-policy.
You must create QoS policies prior to enabling this command.
For CoPP, the keywords cpu-qos must not be used when creating qos-policy-input.
Related
Commands
qos-policy-input – creates a QoS input policy map.
policy-map-input – creates an input policy map.
service-policy rate-limit-protocols
Apply a policy for the system to rate limit control protocols on a per-protocol basis.
S4810, Z-Series
Syntax
service-policy rate-limit-protocols policy-name
Parameters
policy-name Enter the service-policy name, using a string up to 32 characters.
Defaults Not configured.
Command Modes CONTROL-PLANE-CPUQOS
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
Usage
Information
This command applies the service-policy based on the type of protocol defined in the ACL
rules.
You must create ACL and QoS policies prior to enabling this command.
For CoPP, the keyword cpu-qos must not be used when creating qos-policy-input.
Related
Commands
ip access-list extended – creates an extended IP ACL.
mac access-list extended – creates an extended MAC ACL.
qos-policy-input – creates a QoS input policy map.
class-map – creates a QoS class map.
policy-map-input – creates an input policy map.
562