Dell Force10 Z9000 - Show Ip Bgp Community

Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
show ip bgp community
View information on all routes with Community attributes or view specific BGP community groups.
C-Series, E-Series, S-Series
Syntax
show ip bgp ipv4 multicast community [community-number] [local-
as] [no-export] [no-advertise]
Parameters
community-
number
Enter the community number in AA:NN format where AA is the AS
number (2 bytes) and NN is a value specific to that autonomous
system.
You can specify up to eight community numbers to view information
on those community groups.
local-AS
Enter the keywords local-AS to view all routes with the
COMMUNITY attribute of NO_EXPORT_SUBCONFED.
All routes with the NO_EXPORT_SUBCONFED (0xFFFFFF03)
community attribute must not be advertised to external BGP peers.
no-advertise
Enter the keywords no-advertise to view all routes containing
the well-known community attribute of NO_ADVERTISE.
All routes with the NO_ADVERTISE (0xFFFFFF02) community attribute
must not be advertised to other BGP peers.
no-export
Enter the keywords no-export to view all routes containing the
well-known community attribute of NO_EXPORT.
All routes with the NO_EXPORT (0xFFFFFF01) community attribute
must not be advertised outside a BGP confederation boundary.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
435