Dell Force10 Z9000 - Default-Metric; Description

default-metric
Change the metrics of redistributed routes to a value useful to OSPF. Use this command with the redistribute
command.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
default-metric number
To return to the default values, use the no default-metric [number] command.
Parameters
number Enter a number as the metric. The range is 1 to 16777214.
Defaults Disabled.
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1
Introduced on the E-Series.
Related
Commands
redistribute – redistributes routes from other routing protocols into OSPF.
description
Add a description about the selected OSPF configuration.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
description description
To remove the OSPF description, use the no description command.
Parameters
description Enter a text string description to identify the OSPF configuration (80
characters maximum).
Defaults none
Command Modes ROUTER OSPF
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Added support for the Multi-Process OSPF.
1046