EasyManua.ls Logo

Dell Force10 Z9000 - Permit

Dell Force10 Z9000
1483 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FTOS(config-ext-macl)#seq 20 permit any any ev2 eq 806 count
bytes
FTOS(config-ext-macl)#remark 25 IPv6
FTOS(config-ext-macl)#seq 30 permit any any ev2 eq 86dd count
bytes
FTOS(config-ext-macl)#seq 40 permit any any count bytes
FTOS(config-ext-macl)#exit
FTOS(conf)#do show mac accounting access-list snickers
interface g0/47 in
Extended mac access-list snickers on GigabitEthernet 0/47
seq 10 permit any any ev2 eq 800 count bytes (559851886
packets 191402152148
bytes)
seq 20 permit any any ev2 eq 806 count bytes (74481486 packets
5031686754
bytes)
seq 30 permit any any ev2 eq 86dd count bytes (7751519 packets
797843521 bytes)
Related
Commands
mac access-list standard – configures a standard MAC access list.
show mac accounting access-list – displays MAC access list configurations and counters (if
configured).
permit
Configure a filter to pass packets matching the criteria specified.
C-Series, E-Series, S-Series, Z-Series
Syntax
permit {any | host mac-address | mac-source-address mac-source-
address-mask} {any | host mac-address | mac-destination-address
mac-destination-address-mask} [ethertype operator] [count
[byte]] | [log] [monitor]
To remove this filter, you have two choices:
Use the no seq sequence-number command if you know the filter’s sequence
number.
Use the no permit {any | host mac-address | mac-source-
address mac-source-address-mask} {any | mac-destination-
address mac-destination-address-mask} command.
Parameters
any Enter the keyword any to forward all packets.
host Enter the keyword host and then enter a MAC address to forward
packets with that host address.
mac-source-
address
Enter a MAC address in nn:nn:nn:nn:nn:nn format.
mac-source-
address-mask
(OPTIONAL) Specify which bits in the MAC address must match.
The MAC ACL supports an inverse mask; therefore, a mask of
ff:ff:ff:ff:ff:ff allows entries that do not match and a mask of
00:00:00:00:00:00 only allows entries that match exactly.
mac-destination-
address
Enter the destination MAC address and mask in nn:nn:nn:nn:nn:nn
format.
273

Table of Contents

Other manuals for Dell Force10 Z9000

Related product manuals