Dell Force10 Z9000 - Show Processes Memory (C-Series and E-Series)

Example (S-
Series)
FTOS#show processes ipc flow-control
Q Statistics on CP Processor
TxProcess RxProcess Cur High Time Retr Msg Ack Aval Max
Len Mark Out ies Sent Rcvd Retra Retra
ACL0 RTM0 0 0 0 0 0 0 10 10
ACL0 DIFFSERV0 0 0 0 0 0 0 10 10
ACL0 IGMP0 0 0 0 0 0 0 10 10
ACL0 PIM0 0 0 0 0 0 0 10 10
LACP0 IFMGR0 0 0 0 0 0 0 25 25
RTM0 ARPMGR0 0 0 0 0 0 0 136 136
MACMGR0 ACL0 0 0 0 0 0 0 25 25
ARPMGR0 MRTM0 0 0 0 0 0 0 100 100
DHCP0 ACL0 0 1 0 0 1 1 25 25
DHCP0 IFMGR0 0 0 0 0 0 0 25 25
L2PM0 SPANMGR0 0 2 0 0 14 14 25 25
ARPMGR0 FIBAGT0 0 1 0 0 1 1 100 100
SPANMGR0 MACMGR0 0 0 0 0 0 0 25 25
SPANMGR0 IPMGR0 0 0 0 0 0 0 25 25
SPANMGR0 L2PM0 0 0 0 0 0 0 25 25
STP0 L2PM0 0 0 0 0 0 0 25 25
RTM0 FIBAGT0 0 2 0 0 4 4 255 255
L2PM0 STP0 0 5 0 0 5 5 25 25
ACL_AGENT0 PIM0 0 0 0 0 0 0 20 20
ACL_AGENT0 PIM0 0 0 0 0 0 0 20 20
FRRP0 L2PM0 0 0 0 0 0 0 25 25
L2PM0 FRRP0 0 1 0 0 13 13 25 25
ACL0 ACL_AGENT0 0 4 0 0 7 7 90 90
ACL0 MACAGENT0 0 0 0 0 0 0 90 90
IFMGR0 EVENTTERMLOG0 0 1 0 0 1 1 8 8
IFMGR0 SNMP0 0 1 0 0 1 1 8 8
IFMGR0 IPMGR0 0 7 0 0 9 9 8 8
IFMGR0 DIFFSERV0 0 2 0 0 3 3 8 8
DIFFSERV0 ACL_AGENT0 0 0 0 0 0 0 100 100
!---------------output truncated -----------------------!
show processes memory (C-Series and E-Series)
View memory usage information based on processes running in the system.
C-Series, E-Series
Syntax
show processes memory [cp | lp slot-number {lp all | lp
summary} | rp1 | rp2]
Parameters
cp (OPTIONAL) Enter the keyword cp to view memory usage of the
control processor.
lp slot-number (OPTIONAL) Enter the keyword lp and the slot number to view
information on the line-card processor in that slot. For the C-Series,
the range is 0 to 7. For the E-Series, the range is 0 to 13 on the E1200/
E1200i, 0 to 6 on the E600/E600i, and 0 to 5 on the E300.
lp all (OPTIONAL) Enter the keyword lp all to view CP memory usage
on all active line cards.
165