Dell Force10 Z9000 - Show Processes Switch-Utilization; Show Rpm

show processes switch-utilization
Show switch fabric utilization.
E-Series
Syntax
show processes switch-utilization
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.1.1.0 Introduced on the E-Series ExaScale.
E-Series Original command.
Usage
Information
An asterisk ( * ) in the output indicates a legacy card that is not support by the show
processes switch-utilization command.
Example
FTOS#show processes switch-utilization
Switch fabric utilization 5Sec 1Min 5Min
------------------------------------------
3% 3% 3%
show rpm
Show the current RPM status.
C-Series, E-Series
Syntax
show rpm [number [brief] | all]
Parameters
number (OPTIONAL) Enter either zero (0) or 1 for the RPM.
all (OPTIONAL) Enter the keyword all to view a table with information
on all present RPMs.
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of
RPM information.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.5.1.0 Introduced on the C-Series.
171