Dell Force10 Z9000 - Distance Bgp; Description

description
Enter a description of the BGP routing protocol
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
description Enter a description to identify the BGP protocol (80 characters
maximum).
Defaults none
Command Modes ROUTER BGP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
pre-7.7.1.0 Introduced.
Related
Commands
router bgp – enters ROUTER mode on the switch.
distance bgp
Define an administrative distance for routes.
C-Series, E-Series TeraScale, Z-Series, S-Series
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Parameters
external-distance Enter a number to assign to routes learned from a neighbor external
to the AS. The range is 1 to 255. The default is 20.
internal-distance Enter a number to assign to routes learned from a router within the
AS. The range is 1 to 255. The default is 200.
local-distance Enter a number to assign to routes learned from networks listed in the
network command. The range is 1 to 255. The default is 200.
Defaults
• external-distance = 20
• internal-distance = 200
• local-distance = 200
357