Dell Force10 Z9000 - Buffer (Buffer Profile)

buffer (Buffer Profile)
Allocate an amount of dedicated buffer space, dynamic buffer space, or packet pointers to queues 0 to 3.
C-Series, S-Series
Syntax
buffer [dedicated | dynamic | packets-pointers] queue0 number
queue1 number queue2 number queue3 number
Parameters
dedicated Enter the keyword dedicated to configure the amount of dedicated
buffer space per queue.
dynamic Enter the keyword dynamic to configure the amount of dynamic
buffer space per Field Processor.
packets-pointers Enter the keywords packets-pointers to configure the number
of packet pointers per queue.
queue0 number Enter the keyword queue0 and the number to allocate an amount of
buffer space or packet pointers to Queue 0.
• Dedicated Buffer Range: 0 to 2013.
• Dynamic Buffer Range: FP: 0 to 2013. CSF: 0 to 131200 (in
multiples of 80).
• Packet Pointer Range: 0 to 2047.
queue1 number Enter the keyword queue1 and the number to allocate an amount of
buffer space or packet pointers to Queue 1.
• Dedicated Buffer Range: 0 to 2013.
• Dynamic Buffer Range: FP: 0 to 2013. CSF: 0 to 131200 (in
multiples of 80).
• Packet Pointer Range: 0 to 2047.
queue2 number Enter the keyword queue2 and the number to allocate an amount of
buffer space or packet pointers to Queue 2.
• Dedicated Buffer Range: 0 to 2013.
• Dynamic Buffer Range: FP: 0 to 2013. CSF: 0 to 131200 (in
multiples of 80).
• Packet Pointer Range: 0 to 2047.
queue3 number Enter the keyword queue3 and the number to allocate an amount of
buffer space or packet pointers to Queue 3.
• Dedicated Buffer Range: 0 to 2013.
• Dynamic Buffer Range: FP: 0 to 2013. CSF: 0 to 131200 (in
multiples of 80).
• Packet Pointer Range: 0 to 2047.
Defaults none
574