Dell Force10 Z9000 - Show Vlt Counter

Command History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
Usage
Information
The version shown in the show vlt brief output command displays the VLT version
number which is different from the FTOS version number. VLT version numbers are begin with
odd numbers such as 3 or 5.
Example (Brief)
FTOS (conf) #show vlt brief
VLT Domain Brief
----------------------------
Domain ID: 10
Role: Primary
Role Priority: 32768
ICL Link Status: Up
Heart Beat Status: Not Established
VLT Peer Status: Up
Version: 5 (1)
Local System MAC address: 00:01:e8:8b:14:3c
Remote System MAC address: 00:01:e8:8b:15:20
Remote Sytem Version: 5 (1)
Delay-Restore timer: 90 seconds
show vlt counter
Displays the counter information.
Z-Series, S4810
Syntax
show vlt counter [arp| igmp-snoop | interface | mac]
Parameters
arp Enter the keyword arp to display the ARP counter information for the
VLT.
igmp-snoop Enter the keywords igmp-snoop to display the igmp-snooping
counter information for the VLT.
interface Enter the keyword interface to display the interface counter
information for the VLT.
mac Enter the keyword mac to display the MAC address counter
information for the VLT.
Default Not configured.
Command Modes EXEC
Command History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.12.0 Introduced on the S4810.
1462