Dell Force10 Z9000 - Show Interface Dei-Mark

Default Drop precedence: Green
Interface CFI/DEI Drop precedence
---------------------------------------------
Gi 0/1 0 Green
Gi 0/1 1 Yellow
Gi 8/9 1 Red
Gi 8/40 0 Yellow
Related
Commands
dei honor
show interface dei-mark
Display the dei mark configuration.
C-Series, S-Series
Syntax
show interface dei-mark [interface slot/port | linecard number
port-set number]
Parameters
interface slot/port Enter the interface type followed by the line card slot and port
number.
linecard number
port-set number
Enter linecard followed by the line card slot number, then enter
port-set followed by the port-pipe number.
Command Modes EXEC Privilege
Command History
Version 8.3.1.0 Introduced on the C-Series and S-Series.
Example
FTOS#show interface dei-mark
Default CFI/DEI Marking: 0
Interface Drop precedence CFI/DEI
------------------------------------------------
Gi 0/1 Green 0
Gi 0/1 Yellow 1
Gi 8/9 Yellow 0
Gi 8/40 Yellow 0
Related
Commands
dei mark
1449