Dell Force10 Z9000 - Link-Bundle-Monitor Enable; Link-Bundle-Distribution Trigger-Threshold

arranged. This implementation ensures that every chassis having the same prefixes orders the
ECMPs the same.
With eight or less ECMPs, the ordering is lexicographic and deterministic. With more than eight
ECMPs, ordering is deterministic but is not lexicographic.
After enabling IPv6 Deterministic ECMP, traffic loss occurs for a few milliseconds while FTOS
sorts the CAM entries.
link-bundle-monitor enable
Provides a mechanism to enable monitoring of traffic distribution on an ECMP link bundle.
Z-Series, S4810
Syntax
link-bundle-monitor enable
To exit from ecmp group mode, use the exit command.
Command Modes
• ECMP-GROUP
• PORT-CHANNEL INTERFACE
Command History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.10.0 Introduced on the S4810.
link-bundle-distribution trigger-threshold
Provides a mechanism to set the threshold to trigger when traffic distribution will begin being monitored on an ECMP
link bundle.
Z-Series, S4810
Syntax
link-bundle-distribution trigger-threshold [percent]
To exit from ecmp group mode, use the exit command.
Parameters
percent Indicate the threshold value when traffic distribution will start being
monitored on an ECMP link bundle. The range is 1 to 90%. The default
is 60%.
Command Modes EXEC Privilege
Command History
Version 9.0.0.0 Introduced on the Z9000.
617