Dell Force10 Z9000 - Network; Pool; Show Ip Dhcp Binding

network
Specify the range of addresses in an address pool.
C-Series, S-Series, Z-Series, S4810
Syntax
network network /prefix-length
Parameters
network/ prefix-
length
Specify a range of addresses. Prefix-length range is 17 to 31.
Defaults none
Command Modes DHCP <POOL>
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
pool
Create an address pool.
C-Series, S-Series, Z-Series, S4810
Syntax
pool name
Parameters
name Enter the address pool’s identifying name.
Defaults none
Command Modes DHCP
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
show ip dhcp binding
Display the DHCP binding table.
C-Series, S-Series, Z-Series
Syntax
show ip dhcp binding
Defaults none
Command Modes EXEC Privilege
597