Dell Force10 Z9000 - Password

Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0
Introduced on the E-Series.
Usage
Information
If you configure the aaa authentication login default command, the login
authentication default
command automatically is applied to all terminal lines.
Related
Commands
aaa authentication login – selects the login authentication methods.
password
Specify a password for users on terminal lines.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax
password [encryption-type] password
To delete a password, use the no password password command.
Parameters
encryption-type (OPTIONAL) Enter either zero (0) or 7 as the encryption type for the
password entered. The options are
• 0 is the default and means the password is not encrypted and
stored as clear text.
• 7 means that the password is encrypted and hidden.
password Enter a text string up to 32 characters long. The first character of the
password must be a letter. You cannot use spaces in the password.
Defaults No password is configured.
Command Modes LINE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
FTOS prompts users for these passwords when the method for authentication or authorization
used is "line".
Related
Commands
enable password – sets the password for the enable command.
login authentication – configures an authentication method to log in to the switch.
service password-encryption – encrypts all passwords configured in FTOS.
radius-server key – configures a key for all RADIUS communications between the switch and
the RADIUS host server.
1300