Dell Force10 Z9000 - Debug Ip Bgp Updates; Distance Bgp

debug ip bgp updates
View information about BGP updates.
C-Series, E-Series TeraScale, S-Series
Syntax
debug ip bgp updates [in | out]
To disable debugging, use the no debug ip bgp updates [in | out] command.
Parameters
updates Enter the keyword updates to view BGP update information.
in (OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
out (OPTIONAL) Enter the keyword out to view only BGP updates sent to
neighbors.
Defaults Disabled.
Command Modes EXEC Privilege
Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced IPv6 MGBP on the E-Series.
distance bgp
Configure three administrative distances for routes.
C-Series, E-Series TeraScale, S-Series, S4810
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Parameters
external-distance Enter a number to assign to routes learned from a neighbor external
to the AS. The range is 1 to 255. The default is 20.
internal-distance Enter a number to assign to routes learned from a router within the
AS. The range is 1 to 255. The default is 200.
local-distance Enter a number to assign to routes learned from networks listed in the
network command. The range is 1 to 255. The default is 200.
Defaults
• external-distance = 20
• internal-distance = 200
• local-distance = 200
Command Modes ROUTER BGP
423