Object Missing
This object is not available in the repository.
Obtaining Help
As soon as you are in a command mode there are several ways to access help.
To obtain a list of
keywords at any
command mode:
Type a ? at the prompt or after a keyword. There must always be a space before the ?.
To obtain a list of
keywords with a
brief functional
description:
Type help at the prompt.
To obtain a list of
available options:
Type a keyword and then type a space and a ?.
To obtain a list of
partial keywords
using a partial
keyword:
Type a partial keyword and then type a ?.
Example
The following is an example of typing ip ? at the prompt:
FTOS(conf)#ip ?
access-list Named access-list
as-path BGP autonomous system path filter
community-list Add a community list entry
domain-list Domain name to complete unqualified host
name
domain-lookup Enable IP Domain Name System hostname
translation
domain-name Define the default domain name
fib FIB configuration commands
ftp FTP configuration commands
host Add an entry to the ip hostname table
max-frag-count Max. fragmented packets allowed in IP re-
assembly
multicast-routing Enable IP multicast forwarding
name-server Specify address of name server to use
pim Protocol Independent Multicast
prefix-list Build a prefix list
radius Interface configuration for RADIUS
redirect-list Named redirect-list
route Establish static routes
scp SCP configuration commands
source-route Process packets with source routing header
options
ssh SSH configuration commands
tacacs Interface configuration for TACACS+
telnet Specify telnet options
tftp TFTP configuration commands
trace-group Named trace-list
trace-list Named trace-list
FTOS(conf)#ip
47
To Next Page
Loading...
