Dell Force10 Z9000 - Show Mac Learning-Limit

show mac learning-limit
Display MAC address learning limits set for various interfaces.
C-Series, E-Series, Z-Series, S4810
Syntax
show mac learning-limit [violate-action] [detail] [interface
interface [vlan vlan-id]]
Parameters
violate-action (OPTIONALY) Enter the keywords violate-action to display the
MAC learning limit violation status.
detail (OPTIONAL) Enter the keyword detail to display the MAC learning
limit in detail.
interface
interface
(OPTIONAL) Enter the keyword interface with the following
keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For SONET interfaces, enter the keyword sonet followed by
the slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel followed by a number. For the C-Series, the range
is 1 to 128. For the E-Series, the range is 1 to 255 for
TeraScale and 1 to 512 for ExaScale.
vlan vlan-id On the E-Series, enter the keyword vlan followed by the VLAN ID.
The range is 1-4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Added the vlan option on the E-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.5.1.0 Added support for the violate-action and detail options.
Version 6.5.1.0 Added support for Port Channel.
937