Dell Force10 Z9000 - 19 Grub; Clear; List_Env

19
GRUB
CRUB commands are supported on the Z-Series platform only.
To access this mode, hit any key when the following line appears on the console during a system boot:
Press ESC key to stop autoreboot...
Select Force10 Boot on the screen and press C. You enter the GRUB mode immediately, as indicated by the grub>
prompt.
NOTE: This chapter describes only a few commands available in GRUB.
NOTE: You cannot use the Tab key to complete commands in this mode.
clear
Clears the grub screen.
Z-Series
Syntax
clear
Command Modes grub
Command History
Version 8.3.11.1 Introduced on the Z9000.
Example
grub>clear
list_env
Lists all the environment variables.
Z-Series
Syntax
list_env
Command Modes grub
Command History
Version 8.3.11.1 Introduced on the Z9000.
661