Dell Force10 Z9000 - Description; Ip Extcommunity-List

description
Use this feature to designate a meaningful description to the extended community.
C-Series, E-Series, S-Series, Z-Series
Syntax
description {line}
To remove the description, use the no description {line} command.
Parameters
line Enter a description (maximum 80 characters).
Defaults Not configured.
Command Modes CONFIGURATION (conf-ext-community-list)
Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced on the E-Series.
ip extcommunity-list
Use this feature to enter the Extended Community-list mode.
C-Series, E-Series, S-Series, Z-Series
Syntax
ip extcommunity-list word
To exit from this mode, use the exit command.
Parameters
word Enter a community list name (maximum 16 characters).
Defaults none
Command Modes CONFIGURATION (conf-ext-community-list)
Command History
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced on the E-Series.
Usage
Information
This mode changes the prompt.
Example
FTOS(conf)#ip extcommunity-list test
FTOS(conf-ext-community-list)#
446