Dell Force10 Z9000 - Show Command-Tree

show command-tree
Display the entire CLI command tree, and optionally, display the utilization count for each commands and its options.
C-Series, E-Series, S-Series, Z-Series
Syntax
show command-tree [count | no]
Parameters
count Display the command tree with a usage counter for each command.
no Display all of the commands that may be preceded by the keyword
no, which is the keyword used to remove a command from the
running-configuration.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced.
Usage
Information
Reload the system to reset the command-tree counters.
Example
FTOS#show command-tree count
!
Enable privilege mode:
enable command usage:3
<0-15> option usage: 0
exit command usage:1
show command-tree command usage:9
count option usage: 3
show version command usage:1
!
Global configuration mode:
aaa authentication enable command usage:1
WORD option usage: 1
default option usage: 0
enable option usage: 0
line option usage: 0
none option usage: 0
radius option usage: 1
tacacs+ option usage: 0
139