Dell Force10 Z9000 - Page 138

[11/20 15:47:23]: CMD-(CLI):[service timestamps log
datetime]by default from
console
[11/20 15:47:23]: CMD-(CLI):[hostname Force10]by default from
console
[11/20 15:47:23]: CMD-(CLI):[enable password 7 ******]by
default from console
[11/20 15:47:23]: CMD-(CLI):[username admin password 7
******]by default from
console
[11/20 15:47:23]: CMD-(CLI):[enable restricted 7 ******]by
default from console
[11/20 15:47:23]: CMD-(CLI):[protocol spanning-tree rstp]by
default from console
[11/20 15:47:23]: CMD-(CLI):[protocol spanning-tree pvst]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no disable]by default from console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/1]by
default from console
[11/20 15:47:23]: CMD-(CLI):[ip address 1.1.1.1 /24]by default
from console
[11/20 15:47:23]: CMD-(CLI):[ip access-group abc in]by default
from console
[11/20 15:47:23]: CMD-(CLI):[no shutdown]by default from
console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/2]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
[11/20 15:47:23]: CMD-(CLI):[shutdown]by default from console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/3]by
default from console
[11/20 15:47:23]: CMD-(CLI):[ip address 5.5.5.1 /24]by default
from console
[11/20 15:47:23]: CMD-(CLI):[no shutdown]by default from
console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/4]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
[11/20 15:47:23]: CMD-(CLI):[shutdown]by default from console
[11/20 15:47:23]: CMD-(CLI):[interface gigabitethernet 0/5]by
default from console
[11/20 15:47:23]: CMD-(CLI):[no ip address]by default from
console
[11/20 15:47:23]: CMD-(CLI):[shutdown]by default from console
[11/20 21:17:35]: CMD-(CLI):[line console 0]by default from
console
[11/20 21:17:36]: CMD-(CLI):[exec-timeout 0]by default from
console
[11/20 21:17:36]: CMD-(CLI):[exit]by default from console
[11/20 21:19:25]: CMD-(CLI):[show command-history]by default
from console
FTOS#
Related
Commands
clear command history – clears the command history log.
138