Dell Force10 Z9000 - Bfd Enable (Configuration); Bfd Enable (Interface)

Command History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the C-Series.
Version 7.5.1.0 Introduced on the E-Series.
bfd enable (Configuration)
Enable BFD on all interfaces.
C-Series, E-Series, Z-Series, S4810
Syntax
bfd enable
Disable BFD using the no bfd enable command.
Defaults BFD is disabled by default.
Command Modes CONFIGURATION
Command History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.10.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
bfd enable (Interface)
Enable BFD on an interface.
C-Series, E-Series, Z-Series, S4810
Syntax
bfd enable
Defaults BFD is enabled on all interfaces when you enable BFD from CONFIGURATION mode.
Command Modes INTERFACE
Command History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.10.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the E-Series ExaScale.
315