Dell Force10 Z9000 - Page 147

The double asterisk generally indicates the SFM’s frequency capabilities, indicating either that
they are operating at 125 MHz or that the frequency capability, which is stored in an EPROM,
cannot be determined.
If there are no fibre ports in the line card, just the header under show inventory media
is displayed. If there are fibre ports but no optics inserted, the output displays "Media not
present or accessible".
Example (C300)
FTOS# show inventory
Chassis Type : C300
Chassis Mode : 1.0
Software Version : FTOS-EF-7.6.1.0
Slot Item Serial Number Part Number Revision
-----------------------------------------------
C300 TY000001400 7520029999 04
3 LC-CB-GE-48T FX000020075 7520036700 01
0 LC-CB-RPM 0060361 7520029300 02
0 CC-C-1200W-AC N/A N/A N/A
1 CC-C-1200W-AC N/A N/A N/A
0 CC-C300-FAN
* - standby
Software Protocol Configured
-------------------------------------------------
OSPF
FTOS#
Example (E300)
FTOS# show inventory
Chassis Type : E300
Chassis Mode : TeraScale
Software Version : FTOS-EF-7.5.1.0
Slot Item Serial Number Part Number Revision
---------------------------------------------------
E300 0015259 7520009601 02
1 LC-EF3-10GE-2P 0017259 7520012501 01
2 LC-EF3-GE-48T 0017269 7520009702 01
3 LC-EF3-1GE-24P 0031151 7520014206 04
4 LC-EF3-1GE-24P 0017291 7520014202 02
0 LC-EF3-RPM 0031177 7520013808 05
0 CC-E-SFM 0019071 7520003706 A
1 CC-E-SFM 0019120 7520003706 A
1 CC-E300-PWR-DC TDX0524-00031 7520015400 A
0 CC-E300-FAN N/A N/A N/A
* - standby
Software Protocol Configured
--------------------------------------------------
BFD
BGP
ISIS
OSPF
RIP
OSPFV3
FTOS#
147