Dell Force10 Z9000 - Page 1402

• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet followed by the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the slot/ port information.
• For a SONET interface, enter the keyword sonet followed by
the slot/port information.
• Fast Ethernet is not supported.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.5.1.0 Introduced on the E-Series.
Example (E-
Series)
FTOS#show storm-control broadcast gigabitethernet 11/11
Broadcast storm control configuration
Interface Direction Percentage Wred Profile
--------------------------------------------------------
Gi 11/11 Ingress 5.6
Gi 11/11 Egress 5.6 -
FTOS#
Example (C-
Series)
FTOS#show storm-control broadcast gigabitethernet 3/24
Broadcast storm control configuration
Interface Direction Packets/Second
----------------------------------------
Gi 3/24 Ingress 1000
FTOS#
1402